 |
Now slide the blower assembly into place and
insert the top 3" machine screw and plastic spacer through the shroud and blower
assembly. The bottom 3" machine screw and plastic spacer should already be
assembled holding the blowers together. |
 |
Swing the blower assembly out as seen in this
photo. |
 |
If you are sure that everything fits together
correctly then go ahead and peel the plastic covering off the 3M double-sided foam tape. |
 |
With the protective covering removed from the
foam tape go ahead and swing the blower assembly into final position firmly attaching the
foam tape to the shroud. This photo shows the blower assembly with just a few more
degrees to go for the final position. |
 
|
Here is the blower assembly in the appropriate
final position and the UH X2 is now finished.
I have included a few more photos of the assembled UH X2 to help you get
the right idea. |
 |
Side detail. |
 |
Other side detail. |
 |
Blower assembly spacing detail. |
